Lighting

Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash

This handy clip-on light may be the most important accessory you pick up for your bike trailer. Stay safe while riding in low-light conditions by adding extra visibility to your trailer. With 5 LED bulbs and 4 light modes, you’ll be easier to see for drivers and other cyclists, day or night. You’ll Love – - 5 LED bulbs for higher visibility - 4 light modes (flashing, constant, chasing, and random) - Compatible with any Burley trailer that has a Light Loop or Light Bracket - Includes clip-on light and 2 AA batteries

- 1 Super bright LED per light - Easy On/Off - Just push the lens - Weather-tough water-resistant design - Universal rubber bracket - Battery type: CR2032

NiteRider Adapter sold separately from K-EDGE “Combo Mount”. Precision Machined 6061-T6 Aluminum Anodized Gunmetal Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface Enables compatibility with K-Edge GoBig Mounts and Combo Mounts 2x M4 Mounting bolts with Nylok included Compatible with Lumina Series, Mako Series Weight: 11.5 grams

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.

This lightweight bicycle handlebar and accessory mount adapter allows for the perfect placement of your mirror, bell or light. Lightweight and sleek design prevents your handlebar from becoming too cluttered. - Made from hi-tech resin and aluminum alloy - Lightweight accessory holder for handlebar end - Ideally paired with a bell, light or mirror - Works with both road and MTB bars - Minimalist design that does not clutter your bike

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

Pro Series Low Profile Helmet Mount (Not for Lumina Series Lights) System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip -TrailRat & TrailRat Select - RoadRat - Digital Patrol - Pre 2001 Systems

The Beamer 80 was born to be an urban warrior! It's super bright to light your way night or day. This compact light provides 80 lumens of high beam power along with Superflash and Courtesy modes. It packs a big beam but is small enough to stash in your pocket between stops. - High output surface mounted LED provides high power beam along with Courtesy & Superflash modes - FL1 Tested - Run times: 6.5 hrs (80 lm), 24 hrs (Courtesy -24-72 lm) and up to 70 hrs (Superflash - 80 lm) - Provides 130° of visibility - Water resistance rated to IPX4 standard - 2 AAA batteries (included) - A3 cam mount adjusts or removes without tools - 63 grams

Stand out at night! The Blinky 3H combines 3 bright LEDs with a parabolic reflector for up to a mile of visibility. And, its self-leveling helmet mount ensures optimum visibility as you ride. It also includes seatpost and seatstay mounts. The Blinky 3H has steady and flashing modes and runs for up to 100 hours on the included AAA battery. Also, this light includes a reflective lens and side reflective strips for extra safety.

-PB power array and reflector provide visibility for up to 1 mile -Steady, Superflash and Courtesy flash modes -Ultra compact case is weatherproof, lightweight, and durable -Rear rack and seat post mounts included -Up to 150 hours of run time on 2 AAA batteries (included) -85 grams

Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

Be seen with Sunlite's HL-L380/TL-L340 Combo. The front sports three bright Nichia LEDs, steady and flashing modes, and a 200-hour run time! A quick-release handlebar mount is included, too. What's more, the taillight has three LEDs, steady and flashing modes, and a quick-release mounting bracket.

100 lumen USB rechargeable light with excellent side visibility. A versatile rubber strap allows for quick and easy attachment/removal from the handlebar. - Compact rechargeable headlight (100 lm) - Easy to attach and remove, new rubber strap mount - Excellent side visibility - Low battery indicator - USB rechargeable (Micro-USB cable included) - Mode memory function - Two light modes (Constant / Flashing) Run time: - Constant mode 100 lumens:approx 3.5hrs - Flashing mode 100 lumens:approx 35hrs

See and be seen with CatEye's HL-EL135 Headlight. This compact light uses 3 super-bright LEDs for a wide beam that lets you see more of the road. With 2 AA batteries, it provides up to 80 hours of run time on steady mode and up to 320 hours on flash mode. Plus, the no-tools universal mount makes installation fast and easy.

Super bright and compact, Cateye's Omni 3 Front and Rear Safety Lights use CatEye's Omni Directional Technology for increased visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and extend the run time. Plus, CatEye's tool-free FlexTight mount makes installation easy.

Put on the high beams for extra visibility even in the dark corners of space. Portland Design Works' Spaceship Headlight boasts 3 bright LEDs which shine through a precision lens for a bright, focused beam. It offers steady and flashing modes and has a run time of over 100 hours. - Fits 22.0-31.8mm handlebars - Runs on 2 x AA batteries (included) - 100 hours run time - Steady and flashing modes - 91 grams/3.2 ounces - 98 x 41 x 35mm

- Front 10 lumen, Rear 4 lumen 3 LED - 4 modes each - 1 constant, 3 flashing - AAA batteries included - Water resistant construction - Easy to use, multi fit silicone rubber mount

- Combo set featuring a 32 lumen front light paired with an 8 lumen tail light - 2 modes each, constant and flashing - 4 CR2032 batteries included - Water resistant design - Multi fit silicone rubber strap attachment

Compact, super-lightweight USB rechargeable LED cycling safety light. Its durable co-molded construction is minimal and has an IPX7 water-resistance rating. A versatile mounting strap quickly mounts to a variety of bar sizes. Five output modes offer up to 15 lumens and the custom Wide Angle Optics lens provides up to 270° of visibility. The Femto USB Front can run for up to 20 hours and is easily rechargeable with the included Micro USB cable. A secure, threaded composite matrix cover keeps the USB port clean and sealed. The Femto USB is perfect for commuters and recreational riders looking for a simple and inexpensive way to add visibility. Specs - Max Lumens: 15 - Weight: 22g - Max Runtime: 22 hours - Recharge Time: 2:30

Compact, super-lightweight USB rechargeable LED cycling taillight. Its durable co-molded construction is minimal and has an IPX7 water-resistance rating. A versatile mounting strap quickly mounts to a variety of post sizes. Five output modes offer up to 5-lumens and the custom Wide Angle Optics lens provides 270° of visibility. The Femto USB Rear can run for up to 15 hours and is easily rechargeable with the included Micro USB cable. A secure, threaded composite matrix cover keeps the USB port clean and sealed. The Femto USB is perfect for commuters and recreational riders looking for a simple and inexpensive way to add visibility. Specs - Max Lumens: 5 - Weight: 23g - Max Runtime: 15 hours - Recharge Time: 2:30

- 60 Lumen LED commuter and safety light - Up to 18 hours run time with supplied AA batteries - 3 modes inlcuding 2 solid and 1 flashing - Multi-fit rubber strap mounting - Water resistant design

Planet Bike's Beamer 3 Headlight boasts 3 super-bright white Nichia eXtreme LEDs with steady and flashing modes to provide excellent visibility. And, the soft-touch switch makes it easy to change settings, even with gloves on. The Beamer also features a quick-release handlebar mount that attaches in seconds without tools. Plus, the included 2 AA batteries deliver run times of up to 100 hours.

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 50 mm - Visible from the side - 40g

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 80 mm - Visible from the side - 40g

• 5 LED rack mount rear light • 4 modes (1 steady 3 flashing) • Bolt-on mount for rear racks

Topeak's RedLite II mounts on seatposts, seat bags and seatstays. Its 4 super-bright LEDs shine through a 220-degree, wide-angle, reflective lens to alert traffic approaching from almost anywhere. The RedLite's watch-style lithium batteries (included) offer up to 100 hours of run time. Plus, you can choose from constant or blinking mode.

Put it on your handlebars, put it on your fork leg, put it anywhere, Sunlite's Griplite goes everywhere. This powerful little light has 4 LEDs and runs for 60 hours! It has steady and flashing modes and is housed in a water-resistant body.